plc.net.ru

STEP 7 Professional s a 32-bit application that is released for the following operating systems:
MS Windows 2000 Professional SP4
MS Windows XP Professional SP2
MS Windows Server 2003 standard edition as workstation
(Exception: SIMATIC M7, see the release notes for STEP 7 V5.4 SP3, chapter 2.18) SP2
MS Windows VISTA 32 Bit Ultimate, and Business

What's New (What Fix) in V5.4 SP3.1?
• SIMATIC Manager
- The archiving program PKZip V8.6 CLI supplied as part of STEP 7 V5.4 SP3 will be replaced by PKZip V4.0 from STEP 7 V5.4 SP2 for the operating systems MS Windows 2000, MS Windows XP and MS Windows 2003 Server. PKZip V8.6 CLI will still be used with MS Windows Vista. Note the instructions for use in the STEP 7 Readme file.
- If you already own the archiving program WinZip V11.1 Pro with command line option, you can now integrate this product into all supported operating systems. If you want to use WinZip for archiving purposes, we recommend using WinZip V11.1 Pro in connection with the ZIP file format.
• Configuring and Diagnosing Hardware
- The layout of the HW configurations printout was completed.
- The FW update for F-CPUs was extended by an additional prompt for confirmation.
• LAD/STL/FBD
- The NAND block support with only one input was updated.
• TCI
- Handling TCI connections was improved.
• NCM
- IRT configuration of the CP 1616 was improved.
• PG/PC Interface
- Configuration of the PG/PC interface with Windows 2000, Windows XP and Windows 2003 Server is also possible with user rights. Administrator rights are required for this step with Windows Vista according to this operating system's policies.
• S7-PDIAG
- Display of PDIAG monitoring has been expanded.

What's new in S7-PLCSIM V5.4 incl. SP1
• S7-PLCSIM V5.4 incl. SP1 supports the group policy "Do not keep history of recently opened documents".
• S7-PLCSIM V5.4 incl. SP1 enables Windows Vista users to select an Ethernet CPU access node and use the ONLINE view of STEP 7 HW Config.

http://support.automation.siemens.com/W ... n/27460215
Service Release 4 of STEP 7 Professional 2006 SR4
includes updates for the following components:

STEP 7 V5.4 incl. SP3.1 http://support.automation.siemens.com/W ... n/26578452
S7-SCL V5.3 incl. SP4 http://support.automation.siemens.com/W ... n/27461704
S7-GRAPH V5.3 incl. SP5 http://support.automation.siemens.com/W ... n/27242716
S7-PLCSIM V5.4 incl. SP1 http://support.automation.siemens.com/W ... n/27249219

Step7 Professional 2006 SR4

DrWeb reported \CD_1\Setup.ex_ - возможно, инфицирован BACKDOOR.Trojan

Это обычный ложный детект ДрВеба - пошли им ссылку на официальный архив для проверки.
Идентичный файл из http://support.automation.siemens.com/W ... _alone.zip
тоже детектируется

STEP 7 V5.4 including SP4 is a 32-bit application whose functionality has been approved and released for the following operating systems:

· MS Windows XP Professional SP3
· MS Windows Server 2003 SP2 Standard Edition with or without R2 as workstation computer
· MS Windows Vista 32 Bit Ultimate and Business with / without SP1

============ use at your own risk =======================
STEP 7 has not been tested for the following operating systems; use at your own risk:
· MS Windows 2000 SP4
· MS Windows XP Professional with SP1
· MS Windows 2003, SP1, SP1 R2
· MS Windows XP Home
· MS Windows Vista Home Basic, Premium

============ cannot be installed or operated under: =======================
STEP 7 V5.4 including SP4 cannot be installed or operated under:
· MS Windows 3.1
· MS Windows for Workgroups 3.11
· MS Windows 95
· MS Windows 98
· MS Windows Millennium
· MS Windows NT 4.0
· MS Windows XP Professional (without SP)
· MS Windows Vista 64 Bit versions
MS Windows 2000, SP1, SP2, SP3

Important changes have been made to the MS Windows Vista safety concept in STEP 7 V5.4 SP4. This concept is used in case of a new installation (STEP 7 has never been installed on this computer. In this case, most settings, such as the STEP 7 language and mnemonic method are user-defined. This means users can make settings using a PC and their login information. An exception is the setting of the configuration language for the PG/PC interface.

As of V5.4 SP4, the archiving program PKZip V12.0 CLI that ships with STEP 7 is the default program for archiving and retrieving projects and libraries. In MS Windows Vista, the ARJ.exe previously included on the CD is no longer installed since it is unsuitable for this operating system. PKZip V12.0 CLI supports the ZIP format used as default by STEP 7 and can, to some extent, also open other archive formats such as ARJ. If your previous archive format(for example -jar) is not available in MS Windows Vista or is not supported by PKZip, please retrieve your projects on your previous platform and then archive them again with PKZip V4.0 CLI in zip format.

As of V5.4 SP4 access rights for projects/libraries are displayed with a new icon

As of V5.4 SP4, new PROFINET functionalities are available: Prioritized startup , alternating partner port

As of V5.4 SP4, there is a new block library "Redundant IO CGP V5.0". in addition to the previous redundancy libraries "Redundant IO (V1)" and "Redundant IO CGP". This supports redundancy for individual channel groups and can be operated with all previous signal modules that can be operated redundantly. If you want to replace one of the libraries "Redundant IO (V1)" or "Redundant IO CGP" with the "Redundant IO CGP V5.0" library, you will first need to adapt your user program. You will find more information in the Help on Blocks context help or in the STEP 7 readme. There is an up-to-date list of the supported modules as an FAQ

As of V5.4 SP4, you can define placeholders in error texts that are then evaluated during runtime and replaced by suitable associated values in the message.

As of V5.4 SP4, a data block (DB 127) is supported for the CPU Web server.

As of V5.4 SP4, you can specify how a CPU handles messages in a separate tab.

..........

The following installation requirements have not been met:
STEP 7 V5.4 (or higher) must be installed.

Можно вопрос далекого от Симатика человека:
скачав вот это (8*88.888.888 + 47.913.426 bytes ) - устанавливаю через сетап из корневика - грит, нужно сначала установить стп 7 сервис пук 4, чтоб я ставил дальше. Вопрос: это ошибка инсталлера?
Потом я вручную установил Степ7 СП4
(E:\Download\Firefox\STEP7_V5_4_SP4.part01.RAR\STEP7_V5.4_SP4\CD_1\STEP7\Disk1\сетап.ехе) , заново запустил того сетапник из корневика - установка продолжилась...
Вопрос 2: за ключегами нужными нужно брать отсюда:
или где-то еще?
Спасибо

* STEP 7 V5.4 incl. SP4
* S7-SCL V5.3 incl. SP5
* S7-GRAPH V5.3 incl. SP6
* S7-PLCSIM V5.4 incl. SP2

If Step7 not installed then
1. Run Setup from folder Step7/Disk1/Setup.exe
2. Reboot PC
3. Run Setup from main dir
4. Select ALM and Step7 to install

DVD with STEP 7 Professional Edition 2006 Service Release 5 (SR5) also includes the SP4 for STEP 7 V5.4

Contents of DVD STEP 7 Professional 2006 SR5
• Folder CD_1:
- STEP 7 V5.4 incl. SP4
- S7-PLCSIM V5.4 SP2
- Automation License Manager V4.0
• Folder CD_2:
- S7-GRAPH V5.3 incl. SP6
- S7-SCL V5.3 incl. SP5
- SIMATIC iMap STEP 7 Addon
- Shareware version of Acrobat Reader in five languages, with which you can view and print the supplied manuals
- file "STEP 7 - What's New.rtf"
- file "S7-GRAPH - What's New.rtf"
- file "S7-SCL - What's New.rtf"

- Electronic manuals for STEP 7 V5.4
- Electronic manuals for S7-GRAPH V5.3
- Electronic manuals for S7-SCL V5.3
- Electronic manuals for S7-PLCSIM V5.4
- Command Interface description
- Description of the Central Installation Procedure

Step7 V5.4 SP5



I also have identical message when install to comp with Kaspersky antivirus.
Exit from KIS and have installed without problems.

Some antivirus do not like Siemens


This is false "detect" of DrWeb.

But this is problem of DrWeb "euristic"

Service Pack 3 (SP3) for S7-PLCSIM V5.4 provides the following new functions:
-Multiple startability (multi-instance capability) and communication support between the simulated CPUs (simulation instance) !!!
-Optimized download by omitting the Node Browser
-Support of an additional PG/PC interface: PCinternal (local)
-Optimization of the communication between S7-PLCSIM and WinCC / WinCC flexible
-Indication of all CPU access addresses in the status line

http://sourceforge.net/projects/nettoplcsim/
TCP/IP-Network extension for the PLC simulation software Siemens PLCSim (Step 7 V5.4). With NetToPLCSim you are able to simulate e.g. SCADA systems over Network in combination with your simulated PLC.

Im Service Release 6 von STEP 7 Professional 2006 wurden folgende Aktualisierungen der enthaltenen Komponenten aufgenommen:

* STEP 7 V5.4 inkl. SP5 (NEW !)(Новый !)
* S7-PLCSIM V5.4 inkl. SP3 (NEW !)(Новый !)

Die folgenden Komponenten wurden nicht verändert:

* S7-SCL V5.3 inkl. SP5 (Old !)(Старый !)
* S7-GRAPH V5.3 inkl. SP6 (Old !)(Старый !)

Неофициальная руссификация симулятора
перезаписываются файлы английской версии
Просто скопируйте эти файлы в каталог с установленной программой
C:\Program Files\Siemens\Plcsim\S7WSI
заменив находящиеся там
В вариант Русской справки для этой версии добавлены разделы описания языков LAD и STL и блоков ошибок.

Hotfix 1 (K5.4.5.1) for STEP 7 V5.4 SP5
What has Changed Compared to Version STEP 7 V5.4 SP5?

HWConfig
• As of this Hotfix: The "Save and Compile" function has been improved.
• As of this Hotfix: The consistency check of stations with CiR objects and I/O maximum expansion has been improved.
• As of this Hotfix: The dialog for entering the update time in the project properties of the PROFINET IO system has been improved.
• As of this Hotfix: The import of stations with normdevices has been improved.

CPU Messages
• As of this Hotfix: The creation of new messages has been improved.

b0bc034bef4f5d327539bff63e5395c5 *Step7Prof2006SR6.part01.rar
c65b0a5e79beed776148ce5596a85da3 *Step7Prof2006SR6.part02.rar
5313a824c76e110bccfcbc00dd7f3e15 *Step7Prof2006SR6.part03.rar
70b31a8297d8674c7de8ab0e324c960e *Step7Prof2006SR6.part04.rar
00adebe55c4164caaf652c4d2cfe0f22 *Step7Prof2006SR6.part05.rar
18b17098b8bbadf91632249a1d5d021a *Step7Prof2006SR6.part06.rar
bb96d54dfcc272430366c4b1326fb606 *Step7Prof2006SR6.part07.rar
f80b7ef045846599190c8eb131094a29 *Step7Prof2006SR6.part08.rar
e05d7a9745e5738f58354d9b80935e55 *Step7Prof2006SR6.part09.rar
7a1cb065d88672f6d3154114e4c14d5a *Step7Prof2006SR6.part10.rar

http://narod.ru/disk/15993974000/STEP7_V54_SP5_HF3_password_1.zip.html

What has Changed HotFix3 Compared to Version STEP 7 V5.4 SP5?
HWConfig
• The "Save and Compile" function has been improved.
• The consistency check of stations with CiR objects and I/O maximum expansion has been improved.
• The dialog for entering the update time in the project properties of the PROFINET IO system has been improved.
• The import of stations with normdevices has been improved.
• The handling of cyclic interrupts for an improved interoperability with the fail-safe configuration pack has been expanded.
• Monitoring of inputs and outputs is now also supported for CP1616 V2.4.
• As of this Hotfix: The compatibility in case of bandwidth violations with IRT has been improved.
• As of this Hotfix: Configuration of the CP343-1 ERPC is now supported.

CPU Messages
• The creation of new messages has been improved.

NetPro
• As of this Hotfix: The slot view for S7 connections with CP343-1 has been improved.

RSE
• As of this Hotfix: The handling of GSDML files has become more stable.
• As of this Hotfix: Processing of messages from previous versions has been improved.

S7-PCT
• As of this Hotfix: Configuration of S7-PCT has been extended. S7-PCT now supports a standalone mode and you can call it up directly from the MS Windows Start menu.